BGNVX - SILICONE ALKYD ENAMEL,HAZE GRAY

  • MSDS: BGNVX
  • Manufacturer: PRO LINE PAINT COMPANY
  • Product Name: SILICONE ALKYD ENAMEL,HAZE GRAY
  • National Stock Number: 8010-01-145-7056
Product Identification

Product ID:SILICONE ALKYD ENAMEL,HAZE GRAY
MSDS Date:01/01/1985
FSC:8010
NIIN:01-145-7056
MSDS Number: BGNVX

Responsible Party
PRO LINE PAINT COMPANY

Emergency Phone: 714-232-8968

Cage: MO227

Contractor
PRO-LINE PAINT CO
SAN DIEGO, CA 92113-3697 US

Telephone: 619-231-2313; 619-232-8968

Cage: 9D157

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 15%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:INHAL: NOSE/THROAT IRRIT. SKIN: IRRIT OR NERVE
DAMAGE. VOMIT & DIZZ MAY BE CAUSED BY INTOXICATION.

First Aid

First Aid:INHAL: REMOVE TO FRESH AIR. SKIN: WASH W/SOAP & FLUSH. OFF W/
WATER FOR 5 MIN. REMOVE & WASH CONTAMINATED CLOTHES REFORE REUSE.

Fire Fighting

Flash Point:300F;149C; CC
Lower Limits:0.77
Upper Limits:6
Extinguishing Media:WATERFOG,CO*2,DRY CHEM

Accidental Release

Spill Release Procedures:REMOVE IGNITION SOURCES PROVIDE SUFFICIENT
VENT. WEAR RESPIRATOR USE SKIN PROTECTORS & NON-SPARKING TOOLS.

Handling

Handling and Storage Precautions:KEEP AWAY FROM OPEN FLAMES & HEAT. DO
NOT STORE MATERIALS AT TEMPERATURES ABOVE 85F. PROTECT FROM
COMBUSTION.
Other Precautions:EQUIP STORAGE AREAS W/ FIRE EXTINGUISHERS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD AIR-FED HOOD/AIR RESPIRATOR IN
CONFINED AREA (MFR)
Ventilation:GENERAL-SUCTION FAN TO KEEP BELOW TLV.
Protective Gloves:RECOMMENDED
Eye Protection:GOGGLES
Supplemental Safety and Health
COLOR 26270. CONTAINER: 30 GALLON DRUM

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:300F;149C
Vapor Pres:6.9
Vapor Density:3.9
Spec Gravity:1.42
Evaporation Rate & Reference:1.5 (BUAC=1)
Solubility in Water:NEGLIGIBLE
Percent Volatiles by Volume:15

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:HIGH HEAT & OPEN FLAMES. KEEP OUT OF
SUNLIGHT.
Hazardous Decomposition Products:CO,CO*2, ZINC OXIDE

Disposal

Waste Disposal Methods:MFR RECOMMENDS DUMPING SPILLED MATERIAL IN
CONTAINERS & CLOSING IMMED. DISPOSE IAW FED, STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.